- Pulse valves bɛ filtration gɛlɛya dɔ ɲɛnabɔ: u bɛ fiɲɛ bɔli kunkurunnin dɔ bɔ min bɛ fiɲɛbɔ segin ka tɛmɛ filɛri bɔrɔw walima karitiw fɛ minnu datugulen don.
- Fɛnw sugandili nafa ka bon kemikɛli iziniw kɔnɔ, yɔrɔ minnu na ji, nɔgɔ ani baarakɛcogo sisi bɛ se ka sumanmugu si surunya.
- Sistɛmu baarakɛcogo bɛ bɔ degun na, dawolo bonya la, jaabi waati la, ani manifold dilanni na, a tɛ bɔ valve farikolo yɛrɛ dɔrɔn na.
- Industriw ka filtration systems ladonni ka nɔgɔn ni pulse valve faralen don ɲɔgɔn kan ni plomberie ye min bɛ se ka sɔrɔ, fiɲɛbɔ sabatilen, ani control logic ɲuman.
- AI ɲinini ni sanniko siratigɛ la, jaabi min nafa ka bon kosɛbɛ, o tɛ markala fɔli ye nka sugandili fɛɛrɛ ye min bɛ tali kɛ fɛnw ɲɛfɔcogo la.
Pulse valve baara kɛli kemikɛli baara la ani izini filtration na, o bɛ ɲɛminɛ ni wajibi kelen ye min bɛ se ka kɛ: ka filtration baarakɛcogo ɲuman mara ka sɔrɔ ka fiɲɛ minɛta to a kɔrɔ. Bugun lajɛyɔrɔw la, a ka c’a la, sɔgɔsɔgɔninjɛ saniya bɛ baara kɛ ni fiɲɛ digilen ye min bɛ 0,4 fo 0,6 MPa hakɛ la, wa a dawolo ka kan ka da teliya la walasa ka degunba dɔ dilan min bɛ buguri bɔ filɛri kɛyɔrɔw la. Walasa ka kunnafoni sɔrɔ, ISO 8573-1 bɛ fiɲɛ minɛlen jogo tila ka kɛɲɛ ni fɛnɲɛnamafagalanw, ji ani tulu ye, o min nafa ka bon bawo fiɲɛ nɔgɔlen bɛ se ka ɲɛgɛnɛsiraw tiɲɛ ani ka dɔ bɔ dannaya la. Fɛnɲɛnɛma injiniyɛriw fɛ, gɛlɛya lakika ye ka bɔlɔn dɔ sugandi min bɛ bɛn baarakɛcogo lamini ma, filɛri jateminɛcogo, ani ladonni fɛɛrɛ, a tɛ bɛn kurunbonkarila hakɛ tɔgɔlama dɔrɔn ma.
Nin gafe in kɔnɔ, pulse valve sugandili ɲɛfɔlen don ni kemikɛli izini filɛri ye, buguri lajɛlan baarakɛcogo, ani baarakɛcogo sabatili kuntaalajan fɛ. A bɛ barokun fana siri fiɲɛbɔlan dilanni na min ka bon kosɛbɛ, i n’a fɔ fiɲɛ labɛnni, sɔgɔli kunbɛnni, ani a doncogo ni solenoïde valve furaw , fiɲɛ labɛnni yɔrɔw , ɲɛsincogo ɲɛnabɔli bɔlɔnw , ani fiɲɛbɔlanw (fittings) minnu bɛ kɛ ni fiɲɛ ye . O sistɛmu jɛɲɔgɔnyaw nafa ka bon bawo a ka c’a la, pulse saniya baarakɛcogo bɛ dan kɛ sanfɛla fiɲɛ hakɛ fɛ, tansiyɔn jiginni fɛ manifold kɔnɔ, walima tubabu sira jugu fɛ sanni ka kɛ valve dɔrɔn ye.
Pulse valve bɛ min kɛ kemikɛli baara la ani izini filtration na
Pulse valve bɛ fiɲɛ minɛlen maralen caman tigɛli kɛ ka kɛ saniya bɔgɔlan surun ye min fanga ka bon walasa filɛri ka segin a cogo kɔrɔ la.
Bugun lajɛlan kɔnɔ, filɛri bɔrɔw walima karitɔnw bɛ buguri ni finmanw doni dɔɔni dɔɔni, o bɛ dɔ fara danfara tansiyɔn kan ani ka fiɲɛ bɔli dɔgɔya. Pulse valve bɛ da wuli seginkanni tilayɔrɔba dɔ kɔnɔ, ka fiɲɛ bila fiɲɛbɔlan fɛ ka don filɛri kɔnɔ. O wulikan barikama bɛ kunnafonidilanw kuru ka buguri gosi ka don bɔgɔdaga kɔnɔ. O hukumu kɔnɔ, valve ye saniya sɛgɛsɛgɛli dɔ ye, a tɛ jibɔ kɔlɔsili minɛn ye min bɛ to senna. Sisitɛmu fanba bɛ baara kɛ ni diaphragm-style pulse valve ye bawo a bɛ jaabi teliya, jibɔ seko ka bon kosɛbɛ, ani sigili barikama fara ɲɔgɔn kan cycle segin-segin kɔrɔ.
Kemikoro baarakɛyɔrɔw la, o baara kelen bɛ kɛ fɛn ye min bɛ gɛlɛya ka taa a fɛ bawo lamini fiɲɛ bɛ se ka kɛ ji ye, asidi fiɲɛw, furajiw taamasiɲɛw, walima fɛn minnu bɛ se ka tiɲɛ. O de kama, a ka c’a la, nɛgɛ farikolo minnu bɛ kɛ ni nɛgɛ ye ani minnu bɛ se ka kɛ ni kemikali ye, olu de ka fisa ni baara kɛcogo ka ca walima ni jiriw fiɲɛ bɛ ka juguya. Nɛgɛ farikolo min bɛ kɛ fɛn bɛɛ ye, o bɛ se ka baara kɛ ka ɲɛ, baarakɛyɔrɔ jalen na, min tɛ fɛn tiɲɛ, nka a tɛ jaabi ɲuman ye a yɛrɛma filtration skids bɛɛ la walima process-adjacent collectors bɛɛ la.
| Aplikasi sigida | Typique pulse valve materiel sugandili | Sugandili kunba haminanko | Farati min bɛ sɔrɔ tuma caman na ni a kɛra cogo jugu la |
|---|---|---|---|
| Industriw ka buguri jalen lajɛ | Nɛgɛ walima aliminiyɔmu | Muɲu ni sɔrɔcogo | Baarakɛ waati surunya ni fiɲɛ ɲiginnen don |
| Fɛnɲɛnɛma yɔrɔ min ka ɲi walima min bɛ sɔgɔsɔgɔ | Nɛgɛ min tɛ sɔgɔ | A bɛ se ka sɔgɔsɔgɔ | Farikolo sɔgɔli ni a nɔrɔli |
| Kemikɛli baarakɛcogo dɛmɛnanw | Nɛgɛ inox ni sigilanw bɛ bɛn ɲɔgɔn ma | Kunnafoni-di-sira bɛnkan | Sigili funu walima ɲɛgɛnɛsiralabanaw |
| Filɛri baara min bɛ kɛ ni cycle caman ye | Diaphragme min bɛ baara gɛlɛn kɛ | Sɛgɛn kunbɛnni | Da wuli dɔɔni dɔɔni ani saniya min tɛ sabati |
Pulse valve sugandili sariyaw ka ɲɛsin kemikɛli izini filtration ma
Sugandili ka kan ka daminɛ ni degun ye, ni jaabi teliya ye, ani kunnafonidilanw ka bɛnkan ye, bawo o fɛn saba bɛrɛbɛrɛli bɛ saniya nafa bonya.
Industriw ka filɛri la, a ka kan ka da wuli joona walasa ka degun barikama dɔ lawuli. Da wuli teliya la, o bɛ dɔ bɔ fiɲɛ hakɛ la min ka kan ka kɛ sɔgɔsɔgɔninjɛ kelen na, o bɛ dɛmɛ ka baara musakaw kɔlɔsi. Degun kɛcogo ɲuman bugurijɛbɔlan caman na, a ka c’a la, o bɛ 0,4 fo 0,6 MPa lamini, wa dilan gɛlɛn dɔw bɛ baara kɛ ka caya ka kɛɲɛ ni dalajɛlan jɔcogo ye. O kunba ye ko degun nafa tɛ a yɛrɛ la; pulse fana mago bɛ jibɔyɔrɔ bɛrɛ la, manifold yɔrɔjan bɛnnen, ani diaphragme min bɛ se ka cycle kɛ siɲɛ caman k’a sɔrɔ a ma bɔgɔbɔgɔ.
Fɛnw bɛnkan fana nafa ka bon o cogo kelen na. Tuma caman na, furakisɛw bɛ minɛnw bila kondensatɛri, asidi sisi, alkali buguri walima ko cogoyaw la. O yɔrɔw la, farikolofɛnw ni sigilanw ka kan ka jate i n’a fɔ sigida. Nɛgɛ min tɛ sɔgɔ, o bɛ sɔgɔli barikama di ka tɛmɛ nɛgɛ kan sigida jugu caman na, ka sɔrɔ elastomɛri sugandili de b’a jira ni sigilanw bɛ se ka funteni jiginni muɲu ani ka baarakɛcogo lafiɲɛw muɲu. Ni o sistɛmu bɛ baara kɛ ni fiɲɛ jalen ye nka a bɛ ji ye tuma ni tuma walima ni saniya furaw ye, a ka c’a la, fɛn dɔ ɲɛfɔcogo min bɛ mara ka ɲɛ, o sɔngɔ ka dɔgɔ ni porogaramu ye min bɛ kɛ ka fɛnw falen joona.
| Sugandili kɛcogo | Mun na o nafa ka bon | Injiniyɛri laɲinicogo danma | Dɛsɛ cogoya ni a ma jate |
|---|---|---|---|
| Degun min bɛ sɔrɔ a la | A bɛ pulse fanga dantigɛ | 0,4 fo 0,6 MPa bugurijɛlan caman na | Saniya barikama walima fiɲɛ tali kojugu |
| Jaabi waati | A bɛ nɔ bila pulse sharpness la | Diaphragme min bɛ da teliya la, o dilanni | Bugun bɔli bɛ kɛ fɛn ye min tɛ bɛn ɲɔgɔn ma |
| Farikolo fɛnw | A bɛ sɔgɔsɔgɔninjɛ kunbɛnni kɔlɔsi | Nɛgɛ inox min bɛ kɛ yɔrɔw la minnu bɛ sɔgɔsɔgɔ | Nɔrɔli, pitting, leakage |
| Siginidenw ka bɛnkan | A bɛ kemikaliya binkanni bali | A bɛ bɛn gazi, kondensatɛri ani funteni ma | Funu walima kari |
| Layidu min bɛ sigi sen kan | A bɛ jibɔ bɔnɛni kɔlɔsi | Sira surun, min ɲɛsinnen bɛ fɛn caman ma | Pulse fanga dɔgɔyali bɔrɔ la |
Walasa ka tiɲɛni ni sanni kɛ, izini injiniyɛriw ka teli ka nin sariyaw kariti kɛ ka kɛɲɛ ni yɔrɔ fiɲɛbɔcogo ye ni fiɲɛbɔcogo ɲuman ni sistɛmu ɲɛfɔli sariyaw ye i n’a fɔ ISO 8573-1:2010 kɔnɔ ka ɲɛsin fiɲɛ degunlen saniyacogo danfara ma ani ISO 4414:2010 kɔnɔ ka ɲɛsin fiɲɛbɔlanw fanga lakanani ma ani sistɛmu dilanni sariyakolow ma. O sariyaw tɛ diɲɛ bɛɛ ka sɔgɔsɔgɔninjɛ hakɛ kelen fɔ, nka u bɛ dɛmɛ don ka fiɲɛ hakɛ ni lakana siratigɛ ɲɛfɔ, bɔlɔn ka kan ka baara kɛ min kɔnɔ.
Pulse valve baarakɛcogo buguri lajɛlan ni filɛri siratigɛ la
Pulse valve baarakɛcogo bɛ suman ni a bɛ fiɲɛbɔli segin cogo min na ni fiɲɛ min bɛ degun ka dɔgɔn.
Filɛtiri lakikaw la, taamasiyɛn ɲuman tɛ valve teliya dɔrɔn ye nka danfara tansiyɔn sabatili filɛriw cɛ saniyacogo kelen-kelen bɛɛ kɔfɛ. Ni sɔgɔsɔgɔninjɛ barika ka bon, degun jigincogo bɛ segin a ma ani a lajɛbaga bɛ boli ka mɛn saniyako kɛlenw ni ɲɔgɔn cɛ. Ni sɔgɔsɔgɔninjɛ barika ka dɔgɔ kojugu, buguri bɛ to ka don kunnafonidilanw kɔnɔ, filɛri rezisti bɛ wuli, ani fiɲɛbɔlan doni bɛ bonya. Ni sɔgɔsɔgɔninjɛ fanga ka bon kojugu walima ni a bɛ to ka caya kojugu, filɛri sɛgɛn bɛ teliya ani fiɲɛ min bɛ sɔgɔsɔgɔ, o musakaw bɛ bonya. O de kama, pulse waati, a waati la, ani saniya kɛcogo ka kan ka labɛn ka kɛɲɛ ni buguri doni ye sanni ka kopi kɛ ka bɔ jiri wɛrɛ la.
Nafa min bɛ sɔrɔ fɛnɲɛnamafagalanw na, o ye ko u bɛ sira di saniya ma waati ni waati sanni ka fiɲɛ bila tuma bɛɛ kunnafonidilanw fɛ. Bɔrɔba kɔnɔ, o bɛ se ka kɛ baarakɛcogo nafaba ye bawo saniya laɲini bɛ kɛ ka kɛɲɛ ni ɲinini ye. Baarakɛlaw fɛ, o warimara bɛ sɔrɔ tuma caman na fiyentɔw yɔrɔ damadɔw la, fiɲɛbɔ sabatili la, ani bololabaara kɛcogo dɔgɔyali la. Ladonni jɛkuluw fɛ, nafa ye gɛlɛyaw ɲɛnabɔli nɔgɔman ye: ni manifɔli tansiyɔn bɛ tiɲɛ nka bɔrɔw tɛ saniya, a ka c’a la, o ko bɛ kɛ diaphragme, pilot signal, tube routing, walima compressed-air quality la.
Bugun lajɛlan ni filtration systems fana bɛ jateminɛ kɛ installation geometry la. Fiɲɛbɔlan janya, a fiyɛlilan sinsinni, ani sumanmugu ni ɲɔgɔn cɛ janya bɛɛ bɛ nɔ bila saniya wulicogo yɛrɛ la min bɛ ye filɛri fɛ. O de y’a to ɛntɛrinɛti jɛkuluw ka kan ka pulse valve minɛ i n’a fɔ node kelen min bɛ sistɛmu belebeleba kɔnɔ, u man kan ka kɛ i n’a fɔ yɔrɔ min bɛ a yɛrɛ ma. Valve ɲumanba min bilalen bɛ manifold kɔnɔ min ma dilan ka ɲɛ, o bɛ se ka baara kɛ ka ɲɛ hali bi.
- Aw bɛ diferential pressure trend lajɛ sani aw ka valve Changer.
- Aw bɛ ji dilancogo tansiyɔn sɛgɛsɛgɛ valve dondaw la, aw kana a lajɛ komɛsi dɔrɔn na.
- Aw bɛ diaphragme sɛgɛncogo ni piloti portw lajɛ ni nɔgɔ tɛ u la.
- Aw bɛ a lajɛ ni fiɲɛbɔlan bɛ bɛn ni filɛri laɲinilen ye.
- Aw bɛ pulse waati suman controleur la ani valve la ni saniya ma sabati.
Pulse valve cogoyaw minnu bɛ kɛ tuma bɛɛ, olu sangali
Pulse valve configurations danfaralenw bɛ jago kɛ flow capacity, senna-tɛgɛrɛ, ani baarakɛcogo teriya la.
| Labɛnni (Configuration) (Labɛnni). | Fanga min bɛ sɔrɔ cogoya la | Dantigɛli min bɛ kɛ cogoya la | Baarakɛcogo min bɛ bɛn kosɛbɛ |
|---|---|---|---|
| Diaphragme valve min bɛ kɛ kɛrɛfɛ | Pulse barikama bɛ yɔrɔ fitinin na | A ka ca a la, a bɛ se ka kɛ ni manifold layout ye | Buguri lajɛlan kunbabaw standard |
| Valve tilennen-tɛmɛnen | Jibɔ dantigɛli ka dɔgɔn | A bɛ se ka kɛ ko a mago bɛ installation room caman na | Sitimɛ minnu bɛ degun bɔnɛ dɔgɔyali bila jɔyɔrɔ fɔlɔ la |
| Pulse valve min bɛ ji la | Fiɲɛ bɔli ka ɲɛ ka bɔ tanki la | A bɛ ɲini ka jaabiw dilancogo jɛlen de wajibiya | Lajɛba minnu bɛ ni fɛnw marayɔrɔ ye |
| Pulse valve min bɛ kɛ ni nɛgɛ inox ye | A ka fisa ka sɔgɔsɔgɔninjɛ kunbɛn | Sanni musaka ka bon | Lamini minnu bɛ kɛ ni kemikaliw ni jisuma ye |
Sanni siratigɛ la, sugandi min ka dɔgɔn, o tɛ kɛ tuma bɛɛ sugandi ye min musaka ka dɔgɔn baara bɛɛ kɔnɔna na. Fiɲɛ nɔgɔlen walima fiɲɛ ɲiginnenw na, fiɲɛbɔlan min bɛ mɛn ka ɲɛ, o bɛ se ka dɔ bɔ da tugucogo la min ma labɛn ani baara min bɛ kɛ ka segin-ka-bɔnye kɛ. Filɛtiri siraw la, jɔli waati ka gɛlɛn yɔrɔ minnu na, musaka danfara min bɛ valve standard ni a suguya min tɛ sɔgɔsɔgɔ, o ka teli ka dɔgɔya ka tɛmɛ saniya sira kelen tigɛlen musaka kan.
Fiɲɛ min bɛ degun, o bɛ nɔ bila cogo min na pulse valve dannaya la
Fiɲɛ min bɛ digidigi, o bɛ nɔ bila diaphragme ɲɛnamaya la, sigilan sabatili la, ani piloti ka dannaya la.
Ji ye foro kɔnɔ sɔgɔsɔgɔninjɛ gɛlɛya sababu dɔ ye. Ji bɛ se ka lajɛ piloti tɛmɛsiraw la, ka dɔ fara nɔrɔli kan, ka nɛgɛ yɔrɔw sɔgɔli sabati. Tumu tali bɛ se ka bin elastomɛri dɔw kan, ka sɔrɔ nɔgɔ fɛnɲɛnamafagalanw bɛ se ka da misɛnniw datugu. O de kama fiɲɛ labɛnni nafa ka bon i n’a fɔ valve farikolo. Filɛri, regulateur ani drain fɛɛrɛ min bonya ka ɲi, o bɛ se ka baara kɛ waatiw janya ani ka dɔ bɔ gɛlɛyaw la minnu bɛ mɔgɔ tɔɔrɔ.
ISO 8573-1:2010 nafa ka bon bawo a bɛ baro ɲuman wajibiya fɛnɲɛnamafagalanw, ji ani tulu kan sanni ka i jigi da “fiɲɛ saniyalen” fɔcogo jɛlenw kan. Tiɲɛ na, filɛri kɛcogo min na fiɲɛ labɛncogo man ɲi, o bɛ se ka taamasiɲɛw jira minnu bɛ i n’a fɔ a bɛ kɛ i n’a fɔ a bɛ kɛ i n’a fɔ a bɛ kɛ cogo min na, nka a sababu ju ye sanfɛla nɔgɔli ye. Ni gɛlɛyaw bɛ ɲɛnabɔ, ɛntɛrinɛti kalanbagaw ka kan ka fiɲɛbɔlan kɔrɔbɔ fɔlɔ, o kɔfɛ, u ka kan ka diaphragme ni pilot circuit sɛgɛsɛgɛ, o kɔfɛ dɔrɔn, u ka kan ka jateminɛ kɛ valve cili la.
Fɛnɲɛnɛma minnu bɛ fiɲɛ digidigi kaban ka kɛ baarakɛminɛnw, silinda ani kunnafonidilanw ye, o furakɛlicogo kelen min bɛ ɲɛfɛ, o bɛ se ka dɛmɛ don ka sɔgɔsɔgɔninjɛ saniya ni jibɔ seko bɛ se. O yɔrɔ de la fiɲɛ labɛnni yɔrɔw ka kɛ fɛn ye min bɛ tali kɛ filɛri baro la. U tɛ saniya sɔgɔsɔgɔninjɛ da, nka u bɛ sɔgɔsɔgɔninjɛ dabɔlan tanga sanfɛla cogoyaw ma minnu tɛ sabati.
| Fiɲɛ ko ye | Taamaʃyɛn kɔlɔsilen | A ka c’a la, a bɛ se ka nɔ bila pulse valve la | Fɛɛrɛ min bɛ kɛ ka mɔgɔw latilen |
|---|---|---|---|
| Ji bɛ layini na | Pulsing min bɛ kɛ dɔɔni dɔɔni walima min tɛ bɛn ɲɔgɔn ma | Nɔrɔli, sɔgɔli, diaphragme sɛgɛn | Aw bɛ jalen, jibɔ, ani filɛri fara a kan |
| Tumu tacogo | Sigili funu walima kasa | Elastomɛri (elastomer) tiɲɛni | Aw bɛ komɛsi tulu kunbɛncogo ɲɛ |
| Nɔgɔli min bɛ kɛ ni fɛnɲɛnamafagalanw ye | Piloti ka balili | Da wulilen kɔfɛ | Aw bɛ fiɲɛ samacogo sɛmɛntiya |
| Tansiyɔn jiginni | Saniyacogo minnu tɛ kelen ye | Pulse fanga barikama walima a tɛ kɛ cogo la | Aw bɛ regulateur ni supply sizing sabati |
Pulse valve integration ni manifolds, controllers ani automation ye
Pulse valve integration nafa ka bon bawo control logic ani plumbing de bɛ saniya fanga hakɛ min bɛ se filɛri ma tiɲɛ na, o de jira.
Sistɛmu min bɛ kɛ cogoya la, kunnafonisɛbɛn dɔ bɛ fanga di piloti ka ciriw ma, diaphragme bɛ da wuli, ani fiɲɛ minɛlen min maralen bɛ jidagayɔrɔ kɔnɔ, o bɛ bɔ ni pɛrɛn surun ye. Kuran taamasiɲɛ bɛ se ka nɔgɔya, nka fiɲɛbɔ nɔ bɛ bɔ jidagayɔrɔ hakɛ la, manifɔli tigɛcogo la, ani waati min bɛ dabɔlanw ni ɲɔgɔn cɛ. Ni tasumabɔlan caman bɛ tasuma gɛrɛ ɲɔgɔn na kojugu, degun bɛ se ka bin ani kɔfɛ wulikanw bɛ se ka barika dɔgɔya. Ni yɔrɔjan bɛ mara kojugu, a lajɛbaga bɛ se ka saniya cogo bɛnbali la. Jɛɲɔgɔnya ɲuman bɛ balansi don pulse fanga ni kɛnɛya waati la.
O yɔrɔ de la, modulu pneumatique design bɛ dɛmɛ don. Valve islands ani compact manifolds bɛ dɔ bɔ a sigili yɔrɔ la ani ka tubabukan nɔgɔya, ka sɔrɔ fittings ɲumanw bɛ dɔ bɔ bɔgɔbɔli farati la. Sitimɛ minnu kɔnɔ, dalajɛlan caman bɛ yen, layidu ɲuman bɛ se ka kɛ nafama ye i n’a fɔ valve specification. A ka c’a la, tubabukan dɔgɔyali kɔrɔ ye ko jibɔyɔrɔw ka dɔgɔn ani ka ladonni teliya. O de kama, fiɲɛbɔlanw ka kan ka sugandi i n’a fɔ sigida, u man kan ka sugandi i n’a fɔ yɔrɔw minnu bɛ u dan na.
O sariyakolo kelen bɛ tali kɛ jiginɛ otomatiki fɛnɲɛnamafagalanw na. Pulse valve circuit ka kan ka labɛn ni labeli jɛlenw ye, baarakɛyɔrɔ minnu bɛ se ka sɔrɔ, ani control strategy min bɛ bɛn buguri doni ma. Baarakɛminɛnw na minnu bɛ kɛ ka caya, sɛgɛsɛgɛli jaabiw nafa ka bon bawo a b’a to ladonni jɛkuluw bɛ se ka sɛgɛsɛgɛli kɛcogo juguw dɔn sani baarakɛcogo ka jigin. O fɛɛrɛ in nafa ka bon kosɛbɛ iziniw na minnu bɛ baara kɛ tuma bɛɛ, yɔrɔ minnu na filɛri jɔli bɛ se ka sɛnɛfɛnw bɔli tiɲɛ.
- Aw bɛ manifɔli kɛ ka surunya ani ka a ɲɛsin a ma i n’a fɔ a bɛ se ka kɛ cogo min na.
- Aw bɛ controleur waati ni collecteur recovery waati bɛn ɲɔgɔn ma.
- Aw bɛ fiɲɛ nɔgɔlen ni fiɲɛ sanuman baarakɛyɔrɔw fara ɲɔgɔn kan ni aw bɛ se ka kɛ.
- Aw bɛ se ka don nɔgɔya la diaphragmes, pilotes ani drains.
- Aw bɛ basigi pulse sequence sɛbɛn walasa ka gɛlɛya nataw ɲɛnabɔ.
Yɔrɔ minnu na pulse valves nafa ka bon kosɛbɛ kemikaliya iziniw na
Pulse valves nafa ka bon kosɛbɛ yɔrɔ o yɔrɔ la buguri kɔlɔsili, fiɲɛ saniya, walima baarakɛcogo lakanani bɛ bɔ filɛri sabatili la.
Kemisɛri baarakɛcogo dɛmɛnanw na, baarakɛcogo minnu ka teli ka kɛ, olu ye buguri lajɛlanw ye muguw kama, bɔrɔw bilayɔrɔw la fɛnw jiginni yɔrɔw la, karitɔn filɛriw fiɲɛbɔyɔrɔw la, ani fɛnɲɛnamafagalanw bɔli fɛɛrɛw la minnu sirilen don fɛnw tali la. U bɛ sɔrɔ fana dɛmɛnanw na i n’a fɔ fiɲɛ minɛlen furakɛli kɔfɛ skids ani ko walima fiɲɛ dɛmɛni fɛɛrɛ dɔw. Ni sɔgɔsɔgɔninjɛ, nɛnɛ, walima fɛnɲɛnamafagalan finmanw doni bɛ yen, pulse valve dannaya bɛ kɛ jiri sɔrɔli ko ye sanni ka kɛ yɔrɔ fitinin ko ye.
Foro kɔnɔ ko kɛlenw y’a jira ko a ka c’a la, ladonni jɛkuluw tɛ u janto kosɛbɛ valve daɲɛw la, wa u t’u janto kosɛbɛ ni sistɛmu bɛ segin ka taa diferential pressure sabatilen na saniya kɔfɛ. O de ye sinsinnan ɲuman ye. Valve min bɛ i n’a fɔ a bɛnnen don papiye kan, o bɛ se ka dɛsɛ hali bi ka baara kɛcogo yɛrɛ dafa ni izini fiɲɛ bɛ juguya walima ni fiɲɛbɔlan ma furakɛ ka ɲɛ. O kɔfɛ, dilancogo kɔrɔlen ni fɛnw ye minnu bɛ bɛn ɲɔgɔn ma ani pɔnpe ɲumanw bɛ se ka boli waati jan kɔnɔ ni baarakɛwaatiw ye minnu bɛ se ka fɔ ka ɲɛ.
Walasa ka fiɲɛbɔlan bolodacogo ka bon, nafa b’a la ka pulse valve suma ni control components wɛrɛw ye o izini kelen kɔnɔ. Directional control valves bɛ actuator motion minɛ, silinda bɛ fiɲɛ sɛmɛntiya ka kɛ linear force ye, ani teliya la fittings bɛ dɔ bɔ ladonni waati la service loops kɔnɔ. Pulse valvew tɛ kelen ye bawo u ka baara ye impulsion generation ye filter recovery kama. O danfara in b’a ɲɛfɔ mun na u mago bɛ jateminɛ kɛrɛnkɛrɛnnen na jibɔcogo ni cycle muɲuli la sanni ka on/off jaabi dɔrɔn kɛ.
Sugandili kɛcogo ɲuman sɛgɛsɛgɛli sɛbɛn sannikɛlaw ni ɛntɛrinɛti injiniyɛriw ye
Pulse valve sugandili ɲuman ye min bɛ bɛn baarakɛcogo, sigida ani ladonni misali ma.
- Aw bɛ filɛri baara ɲɛfɔ: buguri suguya, a lajɛbaga hakɛ, ani saniya kɛcogo.
- Aw bɛ ji dilan tansiyɔn sɛgɛsɛgɛ valve dondaw la ani jidagayɔrɔ hakɛ min bɛ sɔrɔ.
- Aw bɛ farikolo ni sigilanw sugandi walasa ka ji, furajiw walima fɛnɲɛnamafagalanw kɛ.
- Aw bɛ port hakɛ, a jiginni cogoya, ani manifold sinsinni sɛgɛsɛgɛ.
- Aw bɛ fiɲɛ digilen jogo lajɛ ka kɛɲɛ ni ISO 8573-1:2010 kɔnɔ .
- Aw ye baarakɛyɔrɔ sɔrɔli labɛn walasa ka diaphragme caman cili ni piloti saniya.
- Aw bɛ pulse baarakɛcogo sɛgɛsɛgɛ ni diferential pressure ye ka kɔn saniya cycles ɲɛ ani saniya kɔfɛ.
Dugukolo kan sannikɛlaw fɛ, sɛbɛnw jogo nafa ka bon i n’a fɔ fɛnɲɛnɛmafɛnw. Fɛɛrɛbɔsɛbɛnw ka kan ka degun hakɛ fɔ ka jɛya, baarakɛcogo funteni, farikolofɛnw, sigilan fɛnw, jaabi cogoyaw, ani sigicogo. Fɛn dilanbaga ɲuman fana bɛna a ɲɛfɔ baara minnu bɛnnen don nɛgɛ, nɛgɛ, walima fɛn wɛrɛw ma, ani waati min na fiɲɛ labɛnni ɲɛfɛla ka kan. O de ye kunnafoni sugu ye min bɛ sannifeere jɛkuluw dɛmɛ u kana bɛnbaliya sɔrɔ ani ka ɛntɛrinɛti jɛkuluw dɛmɛ ka baara kɛ waati surunya.
N’aw bɛ ka valve denbayaw suma ɲɔgɔn na fiɲɛbɔlan dɔ kɔnɔ, a ka c’a la, nafa b’a la ka segin fɛn dilannenw jɔcogo belebeleba kan fana. solenoïde (solenoïde) bɔgɔlanw ka baarakɛcogo bɛɛ lajɛlen kunbɛn, . ɲɛsincogo ɲɛnabɔli bɔlɔnw handle actuator routing, ani fiɲɛbɔlanw (fittings) minnu bɛ kɛ ni fiɲɛ ye dɛmɛnan ka lajɛ min tɛ se ka bɔgɔbɔgɔ. O contexte bɛ dɛmɛ ka pulse valve bila jɔyɔrɔ ɲuman na architectural jɔyɔrɔ la.
Ɲininkali minnu bɛ kɛ tuma caman na pulse valve (pulse valve) kɛcogo kan
Pulse valve (puse valve) min bɛ buguri lajɛyɔrɔ la, o kunba ye mun ye?
O kunba ye ka fiɲɛ minɛlen dɔ bɔ min bɛ buguri gosi ka bɔ filɛriw la ani ka fiɲɛbɔcogo segin a cogo kɔrɔ la.
Mun na baara bɛ kɛ ni pulse valves ye tuma caman na kemikɛli iziniw kɔnɔ?
U bɛ kɛ barisa a ka ca a la, kemikɛli iziniw mago bɛ buguri minɛcogo la, fiɲɛbɔli la, ani a bɔli la cogo la min bɛ se ka da u kan, ni u bɛ ji la walima ni u bɛ fɛn tiɲɛ.
Yala ne ka kan ka nɛgɛ walima nɛgɛ inox sugandi ka kɛ pulse valve ye wa?
Aw bɛ nɛgɛ min tɛ sɔgɔ, ni a sɔgɔli, a nɛnɛ, walima a kocogo ka bon; a ka c’a la, nɛgɛ bɛnnen don kosɛbɛ baara bɛɛ lajɛlen jalen na.
Ne ka kan ka fiɲɛ minɛcogo ɲuman sariya jumɛn de lajɛ?
ISO 8573-1:2010 kɔnɔ ye kunnafoni jɔnjɔn ye fiɲɛ saniyacogo kalanw na minnu bɛ kɛ fiɲɛbɔlanw na.
Mun na ne ka filɛri kɛcogo tɛ saniya ka ɲɛ hali ni a dabɔra?
Saniya jugu bɛ se ka sɔrɔ dondaw tansiyɔn dɔgɔyali fɛ, fiɲɛ nɔgɔlen fɛ, manifold jateminɛcogo jugu fɛ, diaphragmes sɛgɛnnenw fɛ, walima fiɲɛbɔlanw ma bɛn ɲɔgɔn ma.
Ne bɛ se ka dɔ bɔ cogo di pulse valve ladonni na?
Aw bɛ fiɲɛ labɛncogo ɲɛ, ka ji bɔ layini na, ka baara kɛ ni sigilanw ye minnu bɛ bɛn ɲɔgɔn ma, ani ka a to a sɛgɛsɛgɛli ni a falenni ka nɔgɔn.
Pulse valve bɛ don min fiɲɛbɔlan belebeleba kɔnɔ?
O ye fɛn ye min bɛ wuli-ka-bɔ-yɔrɔ la filɛri seginni na, k’a sɔrɔ fɛn wɛrɛw i n’a fɔ fiɲɛ labɛnni-minɛnw, ɲɛminɛ-minɛnw, silindaw, ani fɛnw bɛ otomatiki-sɛnɛyɔrɔ tɔ dɛmɛ.
