- Tuma caman na, sɔgɔsɔgɔninjɛ gɛlɛyaw bɛ jira fɔlɔ i n’a fɔ diferential pressure (diferential pressure) ka caya ani pulse saniya barikama.
- Fiɲɛ bɔli, jaabi dɔɔni dɔɔni, ani bobine funtenimaw ye lasɔmini taamasiɲɛw ye joona, u tɛ dimi misɛnninw ye.
- Desizɔn minnu bɛ kɛ ka mɔgɔw bila u nɔ na, olu ka kan ka sinsin baarakɛcogo sumanikɛlan kan, a man kan ka kɛ ɲɛda sɛgɛn dɔrɔn kan.
- ISO, NIST ani OSHA ka bilasiralikanw bɛ dɛmɛ ka baarakɛcogo ni ladonni cogoya ɲɛfɔ fiɲɛbɔlanw na.
Pulse valve cili ye dannaya desizɔn ye, a tɛ kɛ yɔrɔw sanni dɔrɔn ye, bawo buguri lajɛbagaw bɛ u jigi da fiɲɛbɔlan surunw kan minnu fanga ka bon walasa ka buguri bɔ filɛrifɛnw na. Industriw ka fiɲɛbɔlanw na, degun tiɲɛni, fiɲɛ jalen sanuman, ani baarakɛcogo segin-segin nafa ka bon i n’a fɔ valve farikolo yɛrɛ. Walasa ka kunnafoni sɔrɔ, ISO 4414 ye bɛ lakana wajibiyalenw ɲɛfɔ fiɲɛbɔlanw fanga sɔrɔyɔrɔw la, k’a sɔrɔ... NIST Compressed Air System jateminɛ ni a jateminɛ baarakɛminɛn b’a jira cogo min na bɔgɔbɔgɔli ni kɔlɔsili jugu bɛ dɔ fara baara musakaw kan. Ni aw ka buguri lajɛcogo bɛ bɔ sɔgɔsɔgɔninjɛ sabatilen na, sɔgɔsɔgɔninjɛlan ye fɛn fɔlɔw dɔ ye minnu ka kan ka sɛgɛsɛgɛ ni saniya baara bɛ daminɛ ka wuli.
Pulse Valve Replacement Taamaʃyɛnw buguri lajɛyɔrɔ la
Siginiden minnu bɛ fɛn caman bila u nɔ na, olu ye fɛn ye min bɛ se ka suman baarakɛcogo la, a tɛ kɛ si hakɛ dɔrɔn ye. Pulse valve kɛnɛman bɛ da teliya la, a bɛ datugu kosɛbɛ, wa a bɛ datugu pewu marifakisɛ kelen-kelen bɛɛ kɔfɛ, o la ni a lajɛbaga mago bɛ pulse caman na walasa ka danfara tansiyɔn kelen to, a ka c’a la, valve bɛ ka baara kɛcogo tiɲɛ. Tiɲɛ na, ladonni jɛkuluw ka kan k’u janto tansiyɔn jiginni na min bɛ ka bonya, ni saniya kɛcogo tɛ kɛ tuma bɛɛ, ani fɛn o fɛn bɛ fɛn o fɛn Changer de mankan walima a waati la. Olu ye waatiw ye, waati minnu na, valve min bɛ “baara” hali bi, a ka c’a la, o bɛ fanga musaka bɔ kaban ani ka filɛri ɲɛnamaya dɔgɔya.
| Lakɔlɔsili taamasiyɛn | A ka c’a la, a kɔrɔ ye min ye | Foro kɔnɔ nɔ min bɛ kɛ cogoya la | Wale |
|---|---|---|---|
| Diferential tansiyɔn min ka bon | Pulse saniyacogo barikama walima a dafalen tɛ | Fan doni caman, fiɲɛbɔli dɔgɔyali | Aw bɛ diaphragme, pilot port ani control signal sɛgɛsɛgɛ |
| Fiɲɛ bɔli fiɲɛbɔyɔrɔ walima farikolo la | Sigili sɔgɔli, nɔgɔ, diaphragme karilen | Fiɲɛ min bɛ sɔgɔsɔgɔ, o ye wulicogo fanga sabatibali ye | Tansiyɔn sɛgɛsɛgɛli ani ka sigilanw walima sumanw falen |
| Jaabi min bɛ to kɔfɛ | Nɔgɔli, bobine barikantanya, piloti dantigɛli | Bugun bɔli man ɲi, saniya tɛ kelen ye | Aw bɛ tension, wiring, fiɲɛ hakɛ ani jaabi waati lajɛ |
| Bobine funteni walima mankan bɛ min na | Kuran doni kojugu walima a yɔrɔ dɔ tiɲɛni | Opereli min bɛ kɛ waati ni waati | Aw bɛ tension ni coil resistance suman |
Mun na Pulse Valve Failure bɛ kɛ buguri lajɛcogo la
Pulse valve dɛsɛ fanba bɛ bɔ nɔgɔ, sɛgɛn walima baarakɛcogo jugu la. Bugun lajɛbagaw bɛ sigi yɔrɔ gɛlɛnw na, o la sa, bɔgɔdaga bɛ se ka ji, tulu sisi, fɛnɲɛnamafagalan misɛnniw, yɛrɛyɛrɛ ani ka to ka wotoro boli siɲɛ kelen. Waati tɛmɛnen kɔfɛ, diaphragme fɛnw bɛ gɛlɛya, piloti siraw bɛ datugu, ani valve tɛ degunba wuli tuguni min ka kan ka kɛ walasa ka bɔrɔ saniya ka ɲɛ. O nɔ tɛ kɛ tuma bɛɛ ka da tugu yɔrɔnin kelen; tuma caman na, o ye dɔgɔyali ye dɔɔni dɔɔni min bɛ fanga baaracogo ni a ladonni musaka bonya sani mɔgɔ si k’a kɔlɔsi.
Industriw ka bilasiralikan minnu bɛ kɛ fiɲɛ degunlen jogoɲumanya kan, o bɛ dɛmɛ k’a ɲɛfɔ mun na. ISO 8573-1 ye bɛ fiɲɛ minɛlen tila ka kɛɲɛ ni nɔgɔw ye i n’a fɔ fɛnɲɛnamafagalanw, ji, ani tulu, ani fiɲɛ nɔgɔlen min bɛ sɔrɔ, o ye fɛn ye min bɛ kɛ sababu ye ka fɛnɲɛnamafagalanw ka ɲɛnamaya surunya. Bugun lajɛcogo caman na, a dawolo tɛ dɛsɛ a kelen na; a bɛ ka fiɲɛ labɛnbaliya jaabi sanfɛ. O de kama a ka ca a la bana kunbɛncogo nɔgɔman ye filɛri, ji bɔli ani tansiyɔn labɛnni ye ka ɲɛ sani a ka kɛ.
Pulse Valve Replacement Checklist ka ɲɛsin ladonni jɛkuluw ma
Sɛgɛsɛgɛli sɛbɛn min labɛnna, o bɛ jateminɛ kɛ ka kɛ ladonni desizɔn ye min bɛ se ka lafasa. Sanni u ka kɔnɔnafiliko dɔ makɔnɔ a ka dɛsɛ, fɛɛrɛtigiw bɛ se k’a lajɛ ni pulse valve bɛ a ka baara wajibiyalenw dafa hali bi. O nafa ka bon kosɛbɛ baarakɛyɔrɔw la minnu bɛ taa ɲɛ, hali ni saniya tigɛlen surun dɔ bɛ se ka dɔ fara bɔgɔdaga doni kan ani ka dɔ bɔ buguri minɛcogo ɲuman na.
- Aw bɛ ji dilancogo tansiyɔn sɛgɛsɛgɛ valve dondaw la tasuma dontuma na.
- Aw bɛ lamɛnni kɛ ni ji bɛ bɔ fiɲɛbɔyɔrɔ la, dawolo datugulan na, ani pipe jogindaw la.
- Aw bɛ pulse waati suman controleur bɔli la ani ka valve bɛɛ suma ɲɔgɔn na.
- Aw bɛ ɲɛgɛnɛsira lajɛ ni a karilen don, ni funu tɛ, walima ni a dawolo sɔgɔlen don.
- Aw bɛ bobine tension, insulation cogoya, ani connecteur integrity lajɛ.
- Aw bɛ fiɲɛbɔlan lajɛ walasa ka ji, tulu ani fɛnɲɛnamafagalanw sɔrɔ.
- Aw bɛ sumanmugu falen ni filiw seginna ka kɛ saniya ni jateminɛ kɛlen kɔfɛ.
Lakanali siratigɛ la, OSHA ka fiɲɛbɔlan bilasiralikanw b’a jira ko fiɲɛbɔlanw ka kan ka baara kɛ ni u kɔlɔsicogo ɲuman ye ani ko fiɲɛ tansiyɔn ni minɛnw cogoya nafa ka bon don o don baara la: OSHA Fiɲɛ min bɛ sɔgɔsɔgɔ, o lakanani . O kɔrɔ ye ko pulse valve ye system controlled dɔ ye, a tɛ spare part ye min bɛ a dan na. Ni yɔrɔ kelen y’a daminɛ ka wuli, buguri lajɛyɔrɔ bɛɛ bɛ o nɔ ye.
Pulse Valve taamasiɲɛw ni a bɛ tali kɛ baarakɛcogo la min bɛ kɛ cogo la
Ni aw ye kɛwale ɲumanw suma ni kɛwale juguw ye, o bɛ ladonni baarakɛlaw dɛmɛ u k’a latigɛ ni u bɛna saniya, ni u bɛna u dilan, walima ni u bɛna fɛn wɛrɛw bila u nɔ na. O kun ye ka segin-ka-bɔnyew lajɛ. Wajibi tɛ, sɔgɔsɔgɔninjɛ kɛnɛman ka kɛ dafalen ye, nka a ka kan ka tasuma don tuma bɛɛ cycles (sɛrɛkiliw) kɔnɔ ani ka saniya kɛcogo kelen mara jirisunw walima yɔrɔw bɛɛ la.
| Cogo | Taamacogo bɛnnen | Gɛlɛya kɛcogo | Fasirili |
|---|---|---|---|
| Firing mankan | Pulse (Pulse) min ka nɔgɔn, min ka surun | Mankan min bɛ dabila walima min barika ka dɔgɔ | Da wuli teliya dɔgɔyali walima tɛmɛsira datugulen |
| Filɛriw saniyacogo | Bugun gato bɛ bɔ cogo kelen na | Labɔli min tɛ kelen ye walima min tɛ dafa | Valve tɛ impulsion wajibiyalen di tugun |
| Fiɲɛ minɛcogo | Pulse volume min bɛ se ka fɔ ka ɲɛ | A bɛ to ka wuli ka bɔ a nɔ na | Kɔnɔna sigicogo dɛsɛ |
| Goniyahakɛ | Bobine sumalen nka a sabatilen don | Funteni tɛmɛnen | Kuran degun walima bobine tiɲɛni |
Ni bɔgɔlan bɛ to ka bɔn sigilan saniyalen kɔfɛ, a ka c’a la, a falenni bɛ musaka bɔ ka tɛmɛ gɛlɛyaw ɲɛnabɔli kan siɲɛ caman. O bɛ kɛ kɛrɛnkɛrɛnnenya la buguri lajɛyɔrɔbaw la, yɔrɔ minnu na, bɔgɔdaga kelen min ma ɲɛ, o bɛ se ka kunnafonidila wajibiya a ka musaka caman kɛ ani ka dɔ fara fiɲɛ minɛta kan banki fan bɛɛ fɛ.
Pulse Valve (Pulse Valve) min bɛ dɛsɛ, aw bɛ se ka o sɛgɛsɛgɛ cogo min sani aw ka a da
Sɛgɛsɛgɛli ka kan ka daminɛ ni sɛgɛsɛgɛli nɔgɔmanw ye ka taa sɛgɛsɛgɛli jugumanba la. Sɛgɛsɛgɛli fɔlɔ ye taabolo kɛcogo ye tuma bɛɛ : yala diferential pressure (diferential pressure) bɛ wuli joona ka tɛmɛ a cogo kɔrɔ kan, wa yala filɛriw bɛ segin ka bɔ u nɔ na pulse kɔfɛ wa? N’o tɛ, fɛɛrɛ nata ye ka kuran ni fiɲɛ baarakɛcogo sɛgɛsɛgɛ. Pulse valve min bɛ taamasiɲɛ ɲuman sɔrɔ nka a bɛ jaabi dɔɔni dɔɔni hali bi, a ka c’a la, fiɲɛ bɛ don a kɔnɔ walima ka a datugu.
Walasa ka fiɲɛ dilancogo ɲɛfɔ, . ISO 4413 ye bɛ jiko ɲɔgɔndan di jilama-segin lakanani miirili ma, wa o fɛɛrɛ kololi kelen in bɛ tali kɛ fiɲɛbɔlanw na: ka fɛnɲɛnamafagalan kɔlɔsi, ka sɔrɔyɔrɔ sɛgɛsɛgɛ, ka baarakɛminɛn sɛgɛsɛgɛ. Ladonni waleyali siratigɛ la, o kɔrɔ ye ka fɛnw sɔrɔcogo tansiyɔn, valve jaabi, ani jiginɛ nɔ lajɛ i n’a fɔ cakɛda kelen, a kana kɛ ko kɛlenw danfaralenw ye.
- Aw bɛ doni tansiyɔn lajɛ doni yɛrɛ la, aw kana a lajɛ ni a tɛ baara kɛ dɔrɔn.
- Aw bɛ baara kɛ ni bobine walima controleur bɔli ɲuman dɔnnen ye walasa ka kuran filiw bɔ ɲɔgɔn na.
- Aw bɛ a lajɛ ko piloti port jɛlen don ani ko a jalen don.
- Aw bɛ marifaci kɛcogo suma ɲɔgɔn na valve kelenw kan manifold kelen kɔnɔ.
- Sɛbɛnw ka cycle jate, u bɔli hakɛ, ani u saniyacogo ɲuman sani u ka u falen.
Pulse Valve caman cili sariyaw ka kɛɲɛ ni baarakɛcogo juguya ye
Ni baarakɛyɔrɔ ka gɛlɛn, fɛn falen waati min bɛ sɔn ka kɛ, o bɛ surunya. Valve min bɛ baara kɛ baarakɛyɔrɔ la min ka suma, min bɛ ji la, min bɛ sɔgɔsɔgɔ, walima min bɛ kɛ ni cycle caman ye, o man kan ka jate ka kɛɲɛ ni kalandriya si hakɛ dɔrɔn ye. O nɔ na, fɛnw falen-falen sariyaw ka kan ka baara kɛcogo, fiɲɛ hakɛ, funteni ani jɔli musakaw fara ɲɔgɔn kan.
| Baara kɛcogo | Degun min bɛ mɔgɔ bila ka degun | Sɛgɛsɛgɛli kɛcogo caman | Cɛsirilan min bɛ kɛ ka fɛnw falen |
|---|---|---|---|
| Aw bɛ so kɔnɔ buguri lajɛcogo saniya | Ji ka dɔgɔn, a bɛ kɛ cogo min na, a bɛ kɛ cogo min na | Kalo saba o kalo saba | Leakage walima jaabi latɛmɛni |
| Buguri caman bɛ sɔrɔ izini layini na | Bisi boli tuma caman, abrasion | Kalo o kalo | Pulse fanga min tɛ bɛn ɲɔgɔn ma |
| Kɛnɛma walima jisuma sigili | Ji doncogo, a sɔgɔli farati | Kalo o kalo walima waati ko kɛlenw kɔfɛ | Corrosion, sticking, bobine filiw |
| Fɛnɲɛnɛma-baarakɛla min bɛ taa ɲɛ | 24/7 baara, baarakɛwaati ɲinini ka bon | Dɔgɔkun o dɔgɔkun taabolo lajɛ | Saniya nafa dɔgɔyali fɛn o fɛn bɛ se ka suman |
Lamini minnu bɛ se ka da u kan kosɛbɛ, sariya min ka fisa ni tɔw bɛɛ ye, o ye ka fɛnw falen sani a ka bin, a kana kɛ a kɔfɛ. Pulse valve min bɛ da hali bi, nka a bɛ da dɔɔni dɔɔni kojugu walima a barika ka dɔgɔ kojugu, o ye fɛn ye min tiɲɛna kaban. Buguri lajɛli la, a tiɲɛnen kɔrɔ ka teli ka kɛ sɔngɔ gɛlɛn ye.
Sannikɛlaw ka kan ka min ɲininka sani u ka Pulse Valve wɛrɛ sugandi
A caman cili ka kan ka bɛn baarakɛminɛn fɔlɔ ma, a man kan ka bɛn jiri hakɛ dɔrɔn ma. Dɛsɛ caman bɛ kɛ ni valve dɔ bɛ i n’a fɔ a bɛ bɛn ɲɔgɔn ma nka a tɛ se ka degun, funteni walima a wulicogo kelen kunbɛn. Sannifeere jɛkuluw fɛ, ɲininkali minnu nafa ka bon kosɛbɛ, olu ye baarakɛcogo dantigɛli ye, fɛnw bɛncogo, ani ladonni sɔrɔli.
- Buguri lajɛcogo bɛ baara kɛ ni dondaw tansiyɔn hakɛ jumɛn ye tiɲɛ na?
- Yala valve farikolo bɛnnen don fiɲɛ jalen dɔrɔn ma, walima jisuma bɛ kɛ tuma dɔw la wa?
- Yala diaphragme fɛn bɛ bɛn buguri lamini ni funteni ma wa?
- Yala bobine ka wulicogo bɛ sabati izini cogoyaw la wa?
- Yala a bɛ se ka baara kɛ ni valve ye ni pibiliki caman ma Changé wa?
- Yala kunnafoni-falen-falen taamasiɲɛ bɛ bɛn waati jateminɛnan walima PLC ma min bɛ yen wa?
Dimension ni compatibilité discipline kama, pneumatique system caman bɛ nafa sɔrɔ standardization principles la minnu ni minnu bɛ kɛ in ISO 15552 ye silindaw, yɔrɔ minnu na fɛnw falen-falen bɛ dɔ bɔ baarakɛbaliya waati la ani yɔrɔw ɲagaminen na. O hakilina kelen bɛ tali kɛ pulse valves (pulse valves) fana na: ka standardize ni a bɛ se ka kɛ, nka aw bɛ baarakɛcogo sɛgɛsɛgɛ sani aw ka sigi.
Pulse Valve ladonni kɛcogo minnu bɛ baara kɛ waati janya
Banakisɛfagalanw bɛ se ka a cili bila kɔfɛ, nka ni a dawolo bɛ a basigilen na hali bi. Ladonni porogaramu min ka fisa, o sinsinnen bɛ fiɲɛ sanuman kan, kuran maracogo ɲuman kan, ani baarakɛcogo sɛgɛsɛgɛli tuma bɛɛ. Valve min bɛ to fiɲɛ ɲiginnen na walima ni tension sabatibali ye, o bɛna tiɲɛ joona hali ni a minɛna ka ɲɛ cogo o cogo.
- Aw bɛ ji faranfasilanw ni fiɲɛbɔlanw ji bɔ tuma bɛɛ.
- Aw bɛ sanfɛla filɛriw falen walima ka u saniya sani tansiyɔn jiginni ka wuli kojugu.
- Aw bɛ kuran ɲɔgɔndanw to u ka siri ka ɲɛ ani ka u ja.
- Aw bɛ marifaci kɛcogo sɛbɛn ani k’u suma ɲɔgɔn na waati kɔnɔ.
- Aw bɛ ɲɛgɛnɛsiraw falen ni u gɛlɛyara walima u dawolo karilen don taamasiɲɛ fɔlɔ la.
Yɔrɔ min na izini bɛ baara kɛ ni valve caman ye, ladonni sɛbɛn bɛ kɛ sɛgɛsɛgɛli baarakɛminɛn ye. Tuma caman na, outlier valve kelen bɛ sigida nɔgɔko dɔ maana fɔ, bobine tiɲɛnen, walima jibɔ dogolen dɔ layini kɔnɔ. O dalilu sugu nafa ka bon ka tɛmɛ subjective kan “a mankan barika ka dɔgɔ.”
Baarakɛcogo bɔnɛni hakɛ jumɛn ka ca kojugu?
Baarakɛcogo bɔnɛ bɛ kɛ fɛn ye min tɛ sɔn ka kɛ ni bugurijɛlan tɛ se ka minɛcogo ɲuman mara tugun baarakɛcogo la min bɛ kɛ cogoya la. Dakun bɛ taabolo kɛrɛnkɛrɛnnenw de kama, nka sariyakolo bɛ diɲɛ bɛɛ ta la: ni saniya bɛ kɛ ni sɔgɔsɔgɔninjɛ caman ye, fiɲɛ caman, walima waati surunw walasa ka danfara tansiyɔn kelen minɛ dɔrɔn, o la, valve tɛ kɛnɛya tuguni walasa ka baara kɛ min bɛ se ka da a kan. Fɛnɲɛnɛma caman na, o yɔrɔ de la, fɛn caman cili bɛ dilan gosi.
Ni an bɛ fanga siratigɛ la, fiɲɛ min bɛ digidigi, o sɔngɔ ka gɛlɛn ka tiɲɛ. E Ameriki ka fanga minisiriso a kɔlɔsi ko fiɲɛ min bɛ digidigi, a ka c’a la, o ye fɛn sɔngɔ gɛlɛnw dɔ ye izini kɔnɔ, o la, ji bɔli ni a baarakɛbaliya tɛ bɔnɛ fitinin ye. Pulse valve min bɛ dɛsɛ, o bɛ se ka fɛnɲɛnamafagalan min labɛnna ka ɲɛ, o tigɛli ka kɛ fiɲɛbɔlan dogolen ye kabini waati jan sani a ka kɛ sababu ye ka da tugu min bɛ ye.
Ɲininkaliw
Ne bɛ se k’a dɔn cogo di ni pulse valve dɔ ka kan ka wuli walima ni a ka kan ka saniya dɔrɔn?
Ni saniya ye jaabi ɲuman segin a cogo kɔrɔ la ani ka ji bɔli ban, a bɛ se ka kɛ ko a bɛ se ka baara kɛ hali bi. Ni bana taamasiɲɛw seginna joona, a ka ca a la, a falenni de ye sugandili ɲuman ye.
Pulse valve dɛsɛ taamasiɲɛ fɔlɔ min ka teli ka kɛ, o ye mun ye?
Taamaʃyɛn fɔlɔ min ka teli ka kɛ, o ye danfara tansiyɔn jiginni ye buguri lajɛcogo la, o kɔfɛ, saniya sɔgɔsɔgɔninjɛ barikama walima min tɛ sabati.
Yala pulse valve bɛ se ka tiɲɛ kuran fɛ hali ni diaphragme bɛ ka ɲɛ wa?
Awɔ. Bobine barikama, wiring jugu, walima voltage min tɛ sabati, o bɛ se ka kɛ sababu ye ka tasuma don dɔɔni dɔɔni walima ka to ka wuli hali ni fiɲɛ yɔrɔ bɛ i n’a fɔ a ma tiɲɛ.
Mun na ne ka bugurijɛlan bɛ boli hali bi ni pulse valve kelen tiɲɛna?
O sistɛmu bɛ se ka taa a fɛ ka baara kɛ, nka saniya nafa bɛ dɔgɔya, degun bɔnɛ bɛ bonya, ani tuma caman na, fɛn tɔw bɛ baara kɛ kosɛbɛ walasa ka o musaka bɔ.
Yala ne ka kan ka pulse valve bɛɛ falen siɲɛ kelen wa?
A tɛ kɛ tuma bɛɛ. Aw bɛ fɔlɔ ka bɔgɔdaga dɛsɛlen falen, o kɔ aw bɛ bɔgɔdaga tɔw suma ɲɔgɔn na ni jaabi ye, ka kɛɲɛ ni u bɔli ye, ani u saniyacogo fɛ sani aw ka a latigɛ ka u lakurayali dafalen kɛ.
Yala fiɲɛ min bɛ degun, o bɛ nɔ bila tiɲɛ na pulse valve ɲɛnamaya la wa?
Awɔ. Ji, tulu ani fɛnɲɛnamafagalanw bɛ diaphragme sɛgɛn teliya ani pilot-port balili, o bɛ baara kɛ waati surunya.
Ne ka kan ka kunnafoni jumɛnw sɛbɛn sani ka pulse valve dɔ falen?
Aw bɛ donna tansiyɔn, bobine tension, differential pressure trend, leak evidence, firing waati, ani valve si hakɛ walima a cycle jate sɛbɛn.
